01. Germany Siemens Motor
Standard

Uses three phase asynchronous motor and large flow pump as hydraulic active power source. High efficiency, reliability, energy saving, low noise, low vibration, etc.

02. Delta Servo Motor
Optional

Using servo motor as the main power source of hydraulic pump can save about 40% energy. The overall efficiency of the slider increases by about 7-20%. Oil temperature can be reduced by about 10-20°C.

03. Bosch-Rexroth Valve Group
Standard

High energy efficiency easy to maintain and modify. Compact and versatile for a wide range of applications. Highly reliable, efficient and environmentally friendly.

04. American sunny oil pump
Standard

Small size, easy to operate. Long service life, low noise. Easy to dissipate heat.

05. Italy GIVI Grating Ruler
Standard

Precise measurement of deflection and feedback compensation. Ensure bending accuracy. Effectively prevents collision of non-standard parts.

06. Mechanical Crowning
Standard

By CNC control system, precise compensation is obtained to ensure high quality bending accuracy.

07. Italy DSP/MSD Laser Protection
Optional

It has detection area, if an opaque object interrupts the beam, the control system stops the device. Fully protects the personal safety of the operator.

08. AYGD Photoelectric Protection
Optional

Sensitive response and long service life. Customised filters protect against sunlight interference. Dust and oil resistant, rugged construction.

09. Zhongtai Backgauge Finger Stop
Standard

Can be swapped at any time, easy for customers to replace according to the wear condition. Precise size control by adjusting the position of the stop finger.

10. Inovance Backgauge Servo Motor
Standard

Fast response for fast and accurate dynamic control. For fast and precise position, speed, torque and trajectory control.

11. Hiwin Ball Screw and Linear Guide
Standard

Hiwin high precision ball screw and linear guide. Smooth transmission and high adjustment precision.

12. Schneider Electrical Components
Standard

Overload protection, short circuit protection, leakage protection. Sensitive performance, more stable and safe. Energy saving, strong impact resistance.

13. Zhongtai Brand Fast Clamping
Standard

3-step fast tooling clamp, the quick clamping feature allows for individual operation when dealing with longer punches that require the use of multiple clamps. Suitable for frequent replacement.

14. Zhongtai Movable Front Support
Standard

Suitable for workpieces of different shapes, sizes, and processing requirements, helping to locate and support workpieces. Reducing errors caused by workpiece deformation.

DA-53T DELEM

• •1. 10.1″ high resolution colour TFT
• •2. “Hot-key” touch navigation
• •3. Up to 4 axes (Y1, Y2 + 2 aux. axes)
• •4. Advanced Y-axis control algorithms for closed-loop & open-loop valves

DA-58T DELEM

• •1. 15″ high resolution colour TFT
• •2. 2D graphical touch screen programming
• •3. Up to 4 axes (Y1, Y2 + 2 aux. axes)
• •4. Advanced Y-axis control algorithms for closed-loop & open-loop valves

DA-66T DELEM

• •1. 17″ high resolution colour TFT
• •2. 2D graphical touch screen programming
• •3. 3D visualisation in simulation and production
• •4. Delem Modusys compatibility (module scalability & adaptivity)

CybTouch 8 CYBELEC

• •1. 8″ color LCD touch screen display
• •2. One-pass bending process
• •3. Efficient bending programming
• •4. Auto calculation of bending angle, main pressure & deflection compensation

CybTouch 12 CYBELEC

• •1. 12″ color graphic with full touch screen
• •2. Touch 2D graphic part creation with manual sequencing
• •3. Up to 4 axes (Y1, Y2, X, R-axes)
• •4. Bend allowance & pressure-crowning calculation

ESA-S630 ESA

• •1. 10 inch LCD touch screen (Resistive)
• •2. Touch 2D graphic part creation
• •3. Standard 4 axis control (Y1, Y2, X, R)
• •4. Automatic bending force, crowning calculation & modulable tools

ESA-S640 ESA

• •1. 15 inch LCD touch screen (Resistive)
• •2. Touch 2D graphic part creation
• •3. Standard 4 axis, expandable up to 6 axis max
• •4. Automatic bending force, crowning calculation & Tandem machine management

KT15 China Brand

• •1. Manual positioning & product calibration support
• •2. Data backup and recovery support
• •3. Free bending, press bottom bending, arc bending
• •4. Programs can be run in automatic mode